Toll free #:   (888) 417-5214

Local tel #:   (323) 261-7301

Office hours: 8 AM- 4 PM

Walk In hours: 8 AM-3 PM

Triple S Chemicals - Patinas

Patinas in Los Angeles, California

Trilac - 747

        Orders/Questions 1-888-417-5214

  • Facebook Black Round
  • Instagram Black Round
  • Pinterest Black Round

Trilac - 747 is a water-born, air-drying, clear lacquer recommended to use on all type of metal surface, especially copper, Brass, Silver, Zinc & Cadmium or Aluminum. Trilac - 747 dries to a bright, crystal clear finish, which provides tarnish and corrosion resistance.

Product Description

 

Surface Preparation:

 

Trilac - 747 is supplied "READY-TO-GO" and can be sprayed using a conventional air or airless spray equipment.
 

To reduce the viscosity, use only tap water up to 50, depending on the thickness required and the shape of the part.
 

If foaming occurs during the mixing with water, allow to settling or skin off the surface before using.
 

Immersion time is 5-10 seconds and usually dries in air in 15-30 minutes. For faster drying, heat up to 180 ° F may be applied. Parts may be dipped WET since the lacquer is water-soluble; however, the parts should be rinsed thoroughly before lacquering. The dip tank should be lined with a non-rusting material such as STAINLESS STEEL, FIBERGLASS or POLYPROPYLENE.

 

S.D.S.

The information stated herein is based on information and tests we believe to be reliable. The accuracy or completeness thereof is not guaranteed. Since conditions of use are outside our control, user shall, before using, determine the suitability of the product for his intended use and user assumes all risk and liability in connection therewith.