Triple-S’ AL-70 Quick Dry Lacquer is recommended for decorative purposes, abrasion resistance and intended for use by engineers and manufacturers of a wide variety of products. The exceptionally fast dry feature of AL-70 Quick Dry Lacquer makes an ideal coating for use in high production painting and decoration. It is designed primarily for conventional and airless spray application, but may be used in a dip system with careful control. It may be applied to metal, fiberglass or most rigid materials.
Easy to apply.
Saves money by speeding up production
The best and recommended mode of application is with a sprayer (generally a red tip fan). For sprayer application, use a heavy duty pesticide sprayer (i.e. Ortho) with a high volume fan. Spray as light as possible to avoid puddling. An immediate back roll with light pressure can help spread the AL-70 evenly. Sprayer can be cleaned with Acetone. Multiple coats can be applied within 24 hours of each other for added protection. Rolling is also an acceptable form of application. A 1/4 inch or 3/8 inch roller would be recommended. If possible, dipping also works very well. Brushing can leave streak lines and hence not a recommended application technique.
The information stated herein is based on information and tests we believe to be reliable. The accuracy or completeness thereof is not guaranteed. Since conditions of use are outside our control,
user shall, before using, determine the suitability of the product for his intended use and user assumes all risk and liability in connection therewith.