top of page

BLACK SS - 50

Orders/Questions 1-888-417-5214

Product Description

 

Black SS- 50 is a rapid acting chemical formula to develop a black antique finish on stainless steel surfaces at room temperature. The product is a mildly acidic solution containing no chromates, sulfides, cyanides, caustic or phenols. It is recommened for decorative & aesthetic purposes. 

​

Stainless should be sanded prior application to help the patina penetrate.

 

ALWAYS wear a respirator when usng Black SS-50 and apply outside with adequate ventillation. 

Black%20SS-50_edited.jpg

Black SS-50 Procedures:

 

Clean the part with Cleaner 104.  Clean Rinse with over flowing cold water.  Immerse the parts in Black SS- 50 solution for 10-60 seconds. Agitate the parts to break air bubbles and to assure solution contact with all surfaces. Plastic or plastic baskets should be used for small parts.  Rinse thoroughly with over flowing cold water, then wipe dry and seal. For comprehensive instructions, please print 'Data Sheet' in the top right (above the picture). 

The information stated herein is based on information and tests we believe to be reliable. The accuracy or completeness thereof is not guaranteed. Since conditions of use are outside our control, user shall, before using, determine the suitability of the product for his intended use and user assumes all risk and liability in connection therewith.

 

bottom of page