top of page

Orders/Questions 1-888-417-5214

Brown- G is a liquid solution for producing oxidized color tones on Galvanized Steel, Zinc & Zinc Dicasts at room temperature. Brown- G is used primarily for decorative purposes to produce brown finishes.

Product Description




Parts should be free of grease, alkalinity or acidity when immersed in Brown- G solution.  Clean the part with Cleaner 104 and then rinse with fresh water.  Spray, brush, or dip in Brown- G for 10 seconds – 2 minutes depending on concentration.  Rinse with water.  It is recommended that a clear lacquer (e.g. WSL- 55 or AL-70) be applied to the coating to provide maximum life. 



The information stated herein is based on information and tests we believe to be reliable. The accuracy or completeness thereof is not guaranteed. Since conditions of use are outside our control, user shall, before using, determine the suitability of the product for his intended use and user assumes all risk and liability in connection therewith.


bottom of page