top of page

COPPER ON STEEL (Immersion Copper)
Orders/Questions 1-888-417-5214

Product Description


Copper on Steel (Immersion Copper for Stee)l is a Triple-S Product designed to develop a copper color on different steel alloys. This solution is a non-chromate, non-cyanide liquid to produce a thin copper layer on steel at room temperature in approximately 5-10 seconds. It is widely used on lighting fixtures, lamps, sculptures, gift items, etc… The surface will not chip or peel off. 




Clean the part with Cleaner 104.  Rinse thoroughly with water and dry.  Apply Copper on Steel solution with a brush or spray for 5-10 seconds.  Rinse thoroughly with water and allow to dry.  You can turn this Copper to Pewter or Blue Green or Green Patinas by spraying Pewter Look, Green Verde #444, Blue Green Verde #445 or Blue Verde #11 on top of the Copper on Steel.  (A couple of layers of Copper on Steel might be necessary if you wish to add a patina to the  Copper on Steel  Rinse thoroughly with over flowing cold water to stop chemical reaction.   It is recommended to protect the finish with a clear lacquer (e.g., WSL-55 or AL-70)


The information stated herein is based on information and tests we believe to be reliable. The accuracy or completeness thereof is not guaranteed. Since conditions of use are outside our control, user shall, before using, determine the suitability of the product for his intended use and user assumes all risk and liability in connection therewith.


bottom of page