This is a unique formula designed to develop a pure Silver Deposit on Copper, Bronze, Brass or their alloys by immersion or rubbing. This solution is a non-Cyanide paste for the chemical silvering of different metals at room temperature. It is widely used on lighting fixtures, lamps, sculptures, hardware, gift items, and furniture. The surface will not chip, flake, or peel.
Parts must be free of grease, alkalinity or acid when Silver Look is applied. Parts must be thoroughly cleaned and deoxidized prior to blackening. Cleaner 104 is recommended for removing heavy oils and oxidation. Do not use petroleum-degreasing solvents that leave a residue on the surface. Rinse thoroughly with over flowing cold water to remove residual cleaners and dust. It is important that alkaline cleaners are completely rinsed off prior to blackening.
The information stated herein is based on information and tests we believe to be reliable. The accuracy or completeness thereof is not guaranteed. Since conditions of use are outside our control, user shall, before using, determine the suitability of the product for his intended use and user assumes all risk and liability in connection therewith.