top of page

WSL - 55
Orders/Questions 1-888-417-5214

WSL-55 is a Water-base, Air-drying, transparent finish, recommended for all types of metal. This sealer protects the patina finish and will not allow the patina to flake or peel off.

Product Description




  • Non-flammable, safe to use.

  • Excellent corrosion and tarnish protection.

  • Excellent adhesion.

  • Excellent solvent resistance and humidity resistance.

  • Good to excellent resistance to salt spray corrosion.

  • Good to excellent hardness.

  • Heat resistance, good color retention even at 300°F.



The best and recommended mode of application is with a sprayer (generally a red tip fan). For sprayer application, use a heavy duty pesticide sprayer (i.e. Ortho) with a high volume fan. Spray as light as possible to avoid puddling. An immediate back roll with light pressure can help spread the WSL-55 evenly. Sprayer can be cleaned with Acetone. Multiple coats can be applied within 24 hours of each other for added protection. Rolling is also an acceptable form of application.  A 1/4 inch or 3/8 inch roller would be recommended.  If possible, dipping also works very well.  Brushing can leave streak lines and hence not a recommended application technique.  



The information stated herein is based on information and tests we believe to be reliable. The accuracy or completeness thereof is not guaranteed. Since conditions of use are outside our control, user shall, before using, determine the suitability of the product for his intended use and user assumes all risk and liability in connection therewith.


bottom of page